Deep Well Submersible Pump

Identification Code
4SPD3-18-1.1 
4 : Minimum Well Diameter:4 inch
SP: Pump Name
D:Single Phase Motor, Three Phase Motor Without D 
3 : Capacity(m3/h)
18: Stage
1.1 : Motor Power(KW)

Product Instruction
Deep Well Submersible Pump consists of multistage pump and motor . Deep Well Submersible Pump consists of pump body, vane , impeller, inlet flap, outlet flap, shaft and bearing. 
 
Application
Deep Well Submersible Pump is extensively used for domestic, garden use and electrical irrigation,forest water spraying, for civil and indurstrial from open water bodies(rivers,lakes) , well, reservoir or boreholes with inner diameter more than 100mm,water tower deliver and urban construction water, supply and discharge for farms,villages, industrial and mining enterprise. can be operated in the automatic water-supply systems,be used for watering of gardens and vegetable gardens

Operation Conditions
Deep Well Submersible Pump can work properly and continuously under following operational conditions
1.Water temperature: up to 35
2.Sand content:up to 0.25%
3.Well diameter:up to 4 inch

Technical Data
Q.max:6(m3/h)
Capacity:2-3.6 m3/h
Lift Head:128 to 19 (m)
Insulation class:B
Protection grade:IP58

Structure Feature
Pump body:Stainless steel
Motor bracket:Stainless steel
Motor shaft:AISI 316 SS/AISI 304 SS
Pump shaft:AISI 316 SS/AISI 304 SS
Mechanical seal:silicon carbide-tunsten carbide
Impeller:AISI 316 SS/AISI 304 SS
Diffuser:AISI 316 SS/AISI 304 SS
Electric motor:Single-phase motor 220V-50HZ with capacitor and thermal overlad protector. Voltagefluctuation for 10% more or less is allowed and other voltage for 60HZ is also available