Application
Centrifugal single impeller low head water pumps for flow irrigation systems with high flow rate.
Suitable to pump clean water or non-aggressive liquid charged with small solid impurity.
To be used in flow irrigation systems in gardening, agriculture and industrial fittings.
Operating conditions
*Liquid temperature up to 60
*Ambient temperature up to 40
*Total suction lift up to 9mt.
*Continuous duty
Motor
*Two-pole induction motor(n=2850r.p.m)
*Insulation Class B
*Protection IP44
Material
*Pump body: Cast iron
*Motor support: Cast iron, Aluminum for CPM-2 and HCT-S
*Motor housing: Aluminum, Cast iron for HPN
*Impeller: Brass, PPO for HMC-S, AISI 304 SS for HMCS-S
*Shaft with rotor: 45#steel , AISI 416 stainless steel if request
*Mechanical seal: Carbon/Ceramic
Single phase 220V-240V/50Hz
Single phase 110V-127V/60Hz if request Single/three phase 220V/60Hz if request
|
NO. |
TYPE |
POWER |
MAX.FLOW |
MAX.HEAD |
INLET/OUTLET |
MAX.SUCT |
N.W |
PACKING DIMENSION |
|
(Kw) |
(Hp) |
(L/min) |
(m) |
(Inch) |
(m) |
(K.g) |
(mm) |
|
A |
|
0.37 |
0.5 |
90 |
22 |
1"*1" |
9 |
8.9 |
280*190*240 |
|
B |
|
0.55 |
0.75 |
100 |
25 |
1"*1" |
9 |
12.5 |
320*200*255 |
|
C |
|
0.75 |
1 |
120 |
33 |
1"*1" |
9 |
14 |
|
|
D |
|
1.1 |
1.5 |
130 |
38 |
1"*1" |
9 |
20 |
360*260*325 |
|
E |
|
1.5 |
2 |
150 |
42 |
1"*1" |
9 |
21 |
360*260*325 |
|
F |
CPM200 |
2.2 |
3 |
160 |
46 |
1"*1" |
9 |
22 |
360*260*325 | |
MY INQUIRE
English
German
Spanish
French
Sinostar
Portuguese
Japanese
Korean
Arabic
Russian